Image hover effect image

simplex y

the smart choice for your goal

Image hover effect image

simplex y

THE INTELLIGENT CHOICE FOR YOUR GOAL

Manual cleaning filter for drinking and industrial water

There are various technological sectors where the filtration of significant quantities of water is required in order to remove suspended solids, coarse bodies and sand which could cause problems for hydraulic systems (valves, pumps, equipment). This need becomes particularly pressing when the sources of water supply are: rivers, lakes, canals, wells. In all these cases, the use of filters from the SIMPLEX Y series becomes the ideal solution. These are filters without moving parts where the filtering element is made up of a polyester mesh supported by a steel structure. Cleaning the SIMPLEX Y filter is particularly simple. By opening the foot valve it is possible to remove the dirt accumulated in the filter body. To clean the filter cartridge, it is necessary to disassemble the filter body. The main areas of application of the SIMPLEX Y series filters are: agriculture and irrigation, supply of evaporative towers, supplies of power plants for the production of hot water and steam, process water with low content of suspended solids and industrial applications in general.

Water Treatment Industry|SIMPLEX

SCHEDE TECNICHE

In/out connections 1”
Drain connections 1”
Maximum capacity m3/h 10
Filtering area cm2 600
Fluid temperature to be treated min/max °C 5 – 60
Min/max working pressure bar 1,5 - 10
Seals EPDM
Body and lid material AISI304
Support mesh material AISI316
Filter sock Poliestere o AISI316
Filtration grade μm Standard 120
Salinity and acidity < 10.000 ppm TDS, pH 3 ÷ 9

Technical datasheet
currently being updated

In/out connections 1” 1/2
Drain connections 1”
Maximum capacity m3/h 15
Filtering area cm2 600
Fluid temperature to be treated min/max °C 5 – 60
Min/max working pressure bar 1,5 - 10
Seals EPDM
Body and lid material AISI304
Support mesh material AISI316
Filter sock Poliestere o AISI316
Filtration grade μm Standard 120
Salinity and acidity < 10.000 ppm TDS, pH 3 ÷ 9

Technical datasheet
currently being updated

In/out connections 2"
Drain connections 1”
Maximum capacity m3/h 40
Filtering area cm2 1500
Fluid temperature to be treated min/max °C 5 – 60
Min/max working pressure bar 1,5 - 10
Seals EPDM
Body and lid material AISI304
Support mesh material AISI316
Filter sock Poliestere o AISI316
Filtration grade μm Standard 120
Salinity and acidity < 10.000 ppm TDS, pH 3 ÷ 9

Technical datasheet
currently being updated

In/out connections 3"
Drain connections 1”
Maximum capacity m3/h 60
Filtering area cm2 1500
Fluid temperature to be treated min/max °C 5 – 60
Min/max working pressure bar 1,5 - 10
Seals EPDM
Body and lid material AISI304
Support mesh material AISI316
Filter sock Poliestere o AISI316
Filtration grade μm Standard 120
Salinity and acidity < 10.000 ppm TDS, pH 3 ÷ 9

Technical datasheet
currently being updated

In/out connections 3"
Drain connections 1”
Maximum capacity m3/h 80
Filtering area cm2 2200
Fluid temperature to be treated min/max °C 5 – 60
Min/max working pressure bar 1,5 - 10
Seals EPDM
Body and lid material AISI304
Support mesh material AISI316
Filter sock Poliestere o AISI316
Filtration grade μm Standard 120
Salinity and acidity < 10.000 ppm TDS, pH 3 ÷ 9

Technical datasheet
currently being updated

In/out connections DN100
Drain connections 1”
Maximum capacity m3/h 130
Filtering area cm2 2200
Fluid temperature to be treated min/max °C 5 – 60
Min/max working pressure bar 1,5 - 10
Seals EPDM
Body and lid material AISI304
Support mesh material AISI316
Filter sock Poliestere o AISI316
Filtration grade μm Standard 120
Salinity and acidity < 10.000 ppm TDS, pH 3 ÷ 9

Technical datasheet
currently being updated

In/out connections DN100
Drain connections 1”
Maximum capacity m3/h 140
Filtering area cm2 3300
Temperatura fluido da trattare min/max °C 5 – 60
Min/max working pressure bar 1,5 - 10
Seals EPDM
Body and lid material AISI304
Support mesh material AISI316
Filter sock Poliestere o AISI316
Filtration grade μm Standard 120
Salinity and acidity < 10.000 ppm TDS, pH 3 ÷ 9

Technical datasheet
currently being updated

In/out connections DN150
Drain connections 1”
Maximum capacity m3/h 250
Filtering area cm2 3300
Temperatura fluido da trattare min/max °C 5 – 60
Min/max working pressure bar 1,5 - 10
Seals EPDM
Body and lid material AISI304
Support mesh material AISI316
Filter sock Poliestere o AISI316
Filtration grade μm Standard 120
Salinity and acidity < 10.000 ppm TDS, pH 3 ÷ 9

Technical datasheet
currently being updated

In/out connections DN150
Drain connections 1”
Maximum capacity m3/h 300
Filtering area cm2 5400
Temperatura fluido da trattare min/max °C 5 – 60
Min/max working pressure bar 1,5 - 10
Seals EPDM
Body and lid material AISI304
Support mesh material AISI316
Filter sock Poliestere o AISI316
Filtration grade μm Standard 120
Salinity and acidity < 10.000 ppm TDS, pH 3 ÷ 9

Technical datasheet
currently being updated

WTI Logo grigio

Water Treatment Industry SRL
Via Molveno, 8
35035 Mestrino (PD) – ITALY
Tel. +39 049.9002505
info@wtindustry.com

WTI Logo grigio

Water Treatment Industry SRL
Via Molveno, 8
35035 Mestrino (PD) – ITALY
Tel. +39 049.9002505
info@wtindustry.com